Saab 93 Key Fob Replacement
Saab key fobs of 93 can be costly to replace. The process is simple.
You will require a phillips screwdriver with a flat head, and some patience. Place the screwdriver in the middle of the case and slowly open it.
It is a good idea to have spare keys and fobs. You will avoid being stuck and having to pay towing fees.
How to Replace a Battery
All car key fobs that allow you to lock and unlock your car remotely have a battery inside that will eventually fail. With just a few steps, owners can easily replace the battery of their key fob. The key fob comes with two plastic flaps on the one side that you must open in order to take out the battery and replace it with the new one. The replacement battery is an ordinary coin cell CR1632, and the process to install it is straightforward.
Once the emergency key is removed then you can make use of a small screwdriver to cut the case of the remote fob. Do not force the case too hard as the electronics are fragile and could be damaged by too much pressure.
Saab produced some stunning automobiles. Many of them are still in use today. One of the big problems with these cars is their ignition keys. They're not very robust, and they can become sticky or break off with time. It can be expensive for the Saab owner to get a new key from a dealer if they lose their only working one. They'll have to replace the computer module, and then program the new key to convince the car you're not attempting to steal it. The good part is that you can save a lot of dollars by simply replacing the case instead.
How to remove the manual key?
Key fobs that lock and unlock a car have batteries in them, and those batteries do have a life span. If you're like many, yours will die at some time. Fortunately that replacing the manual key fob battery is simple. The only difficult part is taking the old one from the case, but that's nothing a little patience and a few hours of work with a flathead screwdriver cannot help you with.
Once you have the new battery installed, it's time to put everything back together. To accomplish this, you'll have to open the replacement key fob case. This is done by inserting a flathead screwdriver into the slot in the middle of the case. Be gentle with the case until you can remove it.
If the previous keyfob lost its connection with the car's safety system, you may need to change the program of the new one. You can do this by following the manual learning procedure to add a new key fob for your 2010 Saab 9-5. This method DOES NOT erase previously learned keys which means you can use the existing FOBs in case they need to be reprogrammed. This procedure is only initiated by ensuring that the mechanical key of the vehicle matches the cut on the FOB.
How to change the situation?
Whether you're replacing the battery or manual key it's a good idea replace the case too. These cases are prone to wear out, particularly after long-term use. It's simple to replace the case of your SAAB 9-3 and you won't require any special tools.
The first step for changing the case is to remove the manual key from the fob. This can be accomplished by pressing the SAAB logo and pulling out the manual key. The key fob can be sticky at times, so it may take a little bit of force to take the key out.
After you've removed the manual key from the case, you can begin to remove the electronic components. You'll require a flathead screwdriver to do this. Be careful not to harm the electronics inside, so be cautious when using your screwdriver. After you've removed all the electronics, you'll have to remove the battery. After you have replaced the battery, you can place everything back in a brand new case. You can purchase replacement cases online for an affordable price.
How to program the New Key
All key fobs, which allow you to lock or unlock your vehicle remotely, come with batteries. However, they have a limited life span. It is crucial to replace the battery of your key fob at a minimum every three to four years. Fortunately this is a simple process that can be accomplished at home. All you require is a small screwdriver and a bit of patience.
First, take off the manual key. You can do this by pressing the blue SAAB logo on the key fob and pulling the emergency key out. It might take some force but the key will be released easily. Once you are able to open the key fob you can take out the battery that was in it by gently pushing the screwdriver into the slot located in the middle of the case. This will split the case and make it easier to access the electronic components.
G28 is now time to program the key. You can do this by following the steps outlined in this video by YouTube user Cyclone Cyd. This is a fantastic video channel that gives instructions on how to carry out basic maintenance and repair work on cars.
A key fob could be an ideal way to store an extra car key in the event you lose or break the original. You can purchase a replacement key fob online or at a local locksmith store, like United Locksmith. The cost is considerably lower than if you bought the key from a dealer. They would charge for the key and then program it into your car.